Seymour Duncan Diamondhead Distortion Pedal with Boost
Across genres and generations, the sound of a half stack pushed hard with drive and boost has become a standard for rock tones. No genre or era of players has been more heavily defined by these iconic sounds than the classic metal and hard rock pioneers of the late seventies and eighties. Think Judas Priest, Iron Maiden, Ozzy – their combination of tube heads and drive pedals resulted in some of the most iconic guitar tones of all time. Diamondhead captures the power and versatility of that era-defining rig in a package that will find a space on any pedalboard. Whether you’re running it into a clean pedal platform amp or into the frontend of an overdriven tube amp, the Diamondhead provides the flexibility and tonal clarity to authentically capture tbet you would like he sound that defined an era. It all starts with the drive – from breathy and raw medium gain sounds to screaming high-gain harmonics,?Diamondhead?is deep and three-dimensional, with clarity and touch response. Three powerful active EQ controls maximize the potential of the gain section. A tightly defined bass control boosts and cuts at?80 Hz, with surgical precision – making the low end huge, but never muddy. A broader mid-range control set right at?800?Hz allows for massive scooped chunk, hyper aggressive modern attack, and everything in between. And the Treble control, set at 6 kHz, adds sizzle, cut, and attack. The?SAT?Switch?(based on our 805 Overdrive) adds a 24dB pre-gain boost that tightens up the low end for more aggressive and defined attack. Subtly rolling off lows and highs, it allows the mid-range to cut through, creating chewy, harmonic saturation. Independent from the Drive section, the Boost (activated with the left footswitch) offers 0 to 15 dB of available gain and can be used as a lead boost or to push an amp on the edge into overdrive. Try using it with a slightly dirty amp as the first gain stage and adding the Drive section for your highest gain sounds.
Powerful active EQ
SAT switch adds 24db pre-gain boost and tightens up the low end
Independent boost with zero to 15db of gain
Input Impedance: 500KO
Output Impedance: 100O
Gain Range: 30 to 54dB
Gain Range with Sat On: 45 to 69dB
Independent Booster Gain: 0 to 15dB
Noise, Referred to Input: 127dBV
Noise, Sat On: 129dBV
Noise, Booster On: 117dBV
Frequency Response: Response charts available online
Power: 9 - 18V regulated DC adapter (center pin negative)
Current Consumption: 130mA @9V / 65mA @18V
Dimensions: 3.5” x 4.7” x 1.6”
Weight: 0.9lbs
Across genres and generations, the sound of a half stack pushed hard with drive and boost has become a standard for rock tones. No genre or era of players has been more heavily defined by these iconic sounds than the classic metal and hard rock pioneers of the late seventies and eighties. Think Judas Priest, Iron Maiden, Ozzy – their combination of tube heads and drive pedals resulted in some of the most iconic guitar tones of all time. Diamondhead captures the power and versatility of that era-defining rig in a package that will find a space on any pedalboard. Whether you’re running it into a clean pedal platform amp or into the frontend of an overdriven tube amp, the Diamondhead provides the flexibility and tonal clarity to authentically capture tbet you would like he sound that defined an era. It all starts with the drive – from breathy and raw medium gain sounds to screaming high-gain harmonics,?Diamondhead?is deep and three-dimensional, with clarity and touch response. Three powerful active EQ controls maximize the potential of the gain section. A tightly defined bass control boosts and cuts at?80 Hz, with surgical precision – making the low end huge, but never muddy. A broader mid-range control set right at?800?Hz allows for massive scooped chunk, hyper aggressive modern attack, and everything in between. And the Treble control, set at 6 kHz, adds sizzle, cut, and attack. The?SAT?Switch?(based on our 805 Overdrive) adds a 24dB pre-gain boost that tightens up the low end for more aggressive and defined attack. Subtly rolling off lows and highs, it allows the mid-range to cut through, creating chewy, harmonic saturation. Independent from the Drive section, the Boost (activated with the left footswitch) offers 0 to 15 dB of available gain and can be used as a lead boost or to push an amp on the edge into overdrive. Try using it with a slightly dirty amp as the first gain stage and adding the Drive section for your highest gain sounds.
Powerful active EQ
SAT switch adds 24db pre-gain boost and tightens up the low end
Independent boost with zero to 15db of gain
Input Impedance: 500KO
Output Impedance: 100O
Gain Range: 30 to 54dB
Gain Range with Sat On: 45 to 69dB
Independent Booster Gain: 0 to 15dB
Noise, Referred to Input: 127dBV
Noise, Sat On: 129dBV
Noise, Booster On: 117dBV
Frequency Response: Response charts available online
Power: 9 - 18V regulated DC adapter (center pin negative)
Current Consumption: 130mA @9V / 65mA @18V
Dimensions: 3.5” x 4.7” x 1.6”
Weight: 0.9lbs
Across genres and generations, the sound of a half stack pushed hard with drive and boost has become a standard for rock tones. No genre or era of players has been more heavily defined by these iconic sounds than the classic metal and hard rock pioneers of the late seventies and eighties. Think Judas Priest, Iron Maiden, Ozzy – their combination of tube heads and drive pedals resulted in some of the most iconic guitar tones of all time. Diamondhead captures the power and versatility of that era-defining rig in a package that will find a space on any pedalboard. Whether you’re running it into a clean pedal platform amp or into the frontend of an overdriven tube amp, the Diamondhead provides the flexibility and tonal clarity to authentically capture tbet you would like he sound that defined an era. It all starts with the drive – from breathy and raw medium gain sounds to screaming high-gain harmonics,?Diamondhead?is deep and three-dimensional, with clarity and touch response. Three powerful active EQ controls maximize the potential of the gain section. A tightly defined bass control boosts and cuts at?80 Hz, with surgical precision – making the low end huge, but never muddy. A broader mid-range control set right at?800?Hz allows for massive scooped chunk, hyper aggressive modern attack, and everything in between. And the Treble control, set at 6 kHz, adds sizzle, cut, and attack. The?SAT?Switch?(based on our 805 Overdrive) adds a 24dB pre-gain boost that tightens up the low end for more aggressive and defined attack. Subtly rolling off lows and highs, it allows the mid-range to cut through, creating chewy, harmonic saturation. Independent from the Drive section, the Boost (activated with the left footswitch) offers 0 to 15 dB of available gain and can be used as a lead boost or to push an amp on the edge into overdrive. Try using it with a slightly dirty amp as the first gain stage and adding the Drive section for your highest gain sounds.
Powerful active EQ
SAT switch adds 24db pre-gain boost and tightens up the low end
Independent boost with zero to 15db of gain
Input Impedance: 500KO
Output Impedance: 100O
Gain Range: 30 to 54dB
Gain Range with Sat On: 45 to 69dB
Independent Booster Gain: 0 to 15dB
Noise, Referred to Input: 127dBV
Noise, Sat On: 129dBV
Noise, Booster On: 117dBV
Frequency Response: Response charts available online
Power: 9 - 18V regulated DC adapter (center pin negative)
Current Consumption: 130mA @9V / 65mA @18V
Dimensions: 3.5” x 4.7” x 1.6”
Weight: 0.9lbs
