Jackson Audio FUZZ PAGE MKII
The sound of Led Zeppelin! If you like your fuzz to be completely rude and unruly, this is your fuzz! Full of snarl and spit, the FUZZ PAGE MARK II plug-takes the FUZZ and turns it into a classic rock machine!
SIMPLE TO INSTALL
To install the FUZZ MODULE, please perform the following steps:
1) - Remove the back panel of the pedal using a Phillips screwdriver
2) - Lift up on the sides of the plug-in that is currently installed until the plug-in lifts up and out.
3) - Take the new plug-in and align the pins of the three headers into the header sockets and gently press into position. NOTE: The plug-in is keyed so that it cannot be installed backwards.
4) - Reinstall the back panel of the pedal.
5) - Melt faces.
The sound of Led Zeppelin! If you like your fuzz to be completely rude and unruly, this is your fuzz! Full of snarl and spit, the FUZZ PAGE MARK II plug-takes the FUZZ and turns it into a classic rock machine!
SIMPLE TO INSTALL
To install the FUZZ MODULE, please perform the following steps:
1) - Remove the back panel of the pedal using a Phillips screwdriver
2) - Lift up on the sides of the plug-in that is currently installed until the plug-in lifts up and out.
3) - Take the new plug-in and align the pins of the three headers into the header sockets and gently press into position. NOTE: The plug-in is keyed so that it cannot be installed backwards.
4) - Reinstall the back panel of the pedal.
5) - Melt faces.
The sound of Led Zeppelin! If you like your fuzz to be completely rude and unruly, this is your fuzz! Full of snarl and spit, the FUZZ PAGE MARK II plug-takes the FUZZ and turns it into a classic rock machine!
SIMPLE TO INSTALL
To install the FUZZ MODULE, please perform the following steps:
1) - Remove the back panel of the pedal using a Phillips screwdriver
2) - Lift up on the sides of the plug-in that is currently installed until the plug-in lifts up and out.
3) - Take the new plug-in and align the pins of the three headers into the header sockets and gently press into position. NOTE: The plug-in is keyed so that it cannot be installed backwards.
4) - Reinstall the back panel of the pedal.
5) - Melt faces.
