Alvarez AF66CESHB, Folk/OM Guitar with Cutaway and Pickup - Shadowburst - Artist Series

CA$769.00

Alvarez Artist Series ‘66 models are beautifully finished with a deep glass-like shine. Our thin Shadowburst gloss on Mahogany brings out the full aesthetic of the wood to create a warm, premium vibe to match its tone. Our mahogany top guitars have a responsive and focused voice with strong mids and exceptional clarity, and they perform wonderfully for recording and live work.

This cutaway model allows for easy access up the neck and is fitted with the LR Baggs StagePro Bronze. The StagePro Bronze is a small-footprint side-mounted EQ incorporating the renowned LR Baggs Element under-saddle pickup. This is a low-profile unit with a large backlit tuner, volume, bass and treble controls and phase. The battery box is built into the end pin jack compartment for easy access with a simple push to open and change batteries.

About Artist Series

Alvarez Artist Series represents our commitment to quality and care. Our goal is to create an instant bond between you and your guitar through meticulous design in bracing, voicing and overall construction. Every component—from our bi-level bridge to our solid bridge plates and neck blocks—is carefully considered to deliver the best response possible from solid-top construction. 
 
Artist Series guitars are responsive with impressive projection and balance that make them both rewarding and inspiring to play. 
 
With a huge selection of body shapes and wood configurations, Artist Series has a guitar for everyone. For a more focused, woody tone, choose a Mahogany top. For a broader, more open projection, choose Sitka. For a warm response to a lighter, melodic touch, choose Cedar. 

Our Approach to the Build

All of our solid tops are selected by our team and graded independently of our suppliers. If it isn’t worthy, it isn’t used. Our laminated backs and sides are uniquely constructed with Mahogany as our middle layer, and our inner and outer layers are always matched. 

Artist guitars strike the right balance between strength and vibration, crafting a voice to both inspire and give players “tools in the tone.” Alongside this approach to development lies our respect for sourcing, preparation and nurturing the wood we use to make our guitars. No matter how considered design may be, it can only be as good as the wood we use to realize them. 

Our all-solid wood tops, backs and sides, as well as the mahogany used for our necks, go through a curing process developed over years to create stability, strength and tonal benefits. Depending on the wood and its use, this process takes many months or even years for some of our models.

After months-long seasoning, we perform an extra drying stage in thermo-kilns to further enhance wood stability and improve resonance. We call this process ATR—Advanced Tonal Response. ATR™ is a form of torrefaction—oxygen controlled, vacuum curing at special temperatures to remove more moisture and volatiles such as saps and sugars from the wood.

This does two things:

  • ATR™ makes our wood more stable when exposed to adverse dry or humid climates. While we can’t stop the effects of dryness or moisture saturation that can damage guitars, ATR™ goes a long way in helping our guitars become more resilient. Guitars will move or change according to the environment they are in and are more likely to move within the first two years from their production. A guitar usually becomes drier as it ages; this is one of the reasons why players often like the sound of an older guitar. ATR™ advances the natural, post-build drying process so the wood behaves as if it were more mature, stable, and resonant from the first day it is used.

  • The effects of ATR™ are also audible in the instrument. The biggest difference is the clarity and separation between notes and the overall response of the guitar. As the top is drier, it’s also quicker, more resonant, more open, even louder. New guitars can sometimes take time to reach this state as the wood dries over the years. ATR accelerates this effect to deliver a more sophisticated and complex voicing from day one.

Our caring approach to development comes from one unwavering goal: To deliver the best guitars in the market at every price point—instruments of a truly remarkable value that offer an unparalleled player experience.

Thank you for choosing Alvarez.

Quantity:
Add To Cart

Alvarez Artist Series ‘66 models are beautifully finished with a deep glass-like shine. Our thin Shadowburst gloss on Mahogany brings out the full aesthetic of the wood to create a warm, premium vibe to match its tone. Our mahogany top guitars have a responsive and focused voice with strong mids and exceptional clarity, and they perform wonderfully for recording and live work.

This cutaway model allows for easy access up the neck and is fitted with the LR Baggs StagePro Bronze. The StagePro Bronze is a small-footprint side-mounted EQ incorporating the renowned LR Baggs Element under-saddle pickup. This is a low-profile unit with a large backlit tuner, volume, bass and treble controls and phase. The battery box is built into the end pin jack compartment for easy access with a simple push to open and change batteries.

About Artist Series

Alvarez Artist Series represents our commitment to quality and care. Our goal is to create an instant bond between you and your guitar through meticulous design in bracing, voicing and overall construction. Every component—from our bi-level bridge to our solid bridge plates and neck blocks—is carefully considered to deliver the best response possible from solid-top construction. 
 
Artist Series guitars are responsive with impressive projection and balance that make them both rewarding and inspiring to play. 
 
With a huge selection of body shapes and wood configurations, Artist Series has a guitar for everyone. For a more focused, woody tone, choose a Mahogany top. For a broader, more open projection, choose Sitka. For a warm response to a lighter, melodic touch, choose Cedar. 

Our Approach to the Build

All of our solid tops are selected by our team and graded independently of our suppliers. If it isn’t worthy, it isn’t used. Our laminated backs and sides are uniquely constructed with Mahogany as our middle layer, and our inner and outer layers are always matched. 

Artist guitars strike the right balance between strength and vibration, crafting a voice to both inspire and give players “tools in the tone.” Alongside this approach to development lies our respect for sourcing, preparation and nurturing the wood we use to make our guitars. No matter how considered design may be, it can only be as good as the wood we use to realize them. 

Our all-solid wood tops, backs and sides, as well as the mahogany used for our necks, go through a curing process developed over years to create stability, strength and tonal benefits. Depending on the wood and its use, this process takes many months or even years for some of our models.

After months-long seasoning, we perform an extra drying stage in thermo-kilns to further enhance wood stability and improve resonance. We call this process ATR—Advanced Tonal Response. ATR™ is a form of torrefaction—oxygen controlled, vacuum curing at special temperatures to remove more moisture and volatiles such as saps and sugars from the wood.

This does two things:

  • ATR™ makes our wood more stable when exposed to adverse dry or humid climates. While we can’t stop the effects of dryness or moisture saturation that can damage guitars, ATR™ goes a long way in helping our guitars become more resilient. Guitars will move or change according to the environment they are in and are more likely to move within the first two years from their production. A guitar usually becomes drier as it ages; this is one of the reasons why players often like the sound of an older guitar. ATR™ advances the natural, post-build drying process so the wood behaves as if it were more mature, stable, and resonant from the first day it is used.

  • The effects of ATR™ are also audible in the instrument. The biggest difference is the clarity and separation between notes and the overall response of the guitar. As the top is drier, it’s also quicker, more resonant, more open, even louder. New guitars can sometimes take time to reach this state as the wood dries over the years. ATR accelerates this effect to deliver a more sophisticated and complex voicing from day one.

Our caring approach to development comes from one unwavering goal: To deliver the best guitars in the market at every price point—instruments of a truly remarkable value that offer an unparalleled player experience.

Thank you for choosing Alvarez.

Alvarez Artist Series ‘66 models are beautifully finished with a deep glass-like shine. Our thin Shadowburst gloss on Mahogany brings out the full aesthetic of the wood to create a warm, premium vibe to match its tone. Our mahogany top guitars have a responsive and focused voice with strong mids and exceptional clarity, and they perform wonderfully for recording and live work.

This cutaway model allows for easy access up the neck and is fitted with the LR Baggs StagePro Bronze. The StagePro Bronze is a small-footprint side-mounted EQ incorporating the renowned LR Baggs Element under-saddle pickup. This is a low-profile unit with a large backlit tuner, volume, bass and treble controls and phase. The battery box is built into the end pin jack compartment for easy access with a simple push to open and change batteries.

About Artist Series

Alvarez Artist Series represents our commitment to quality and care. Our goal is to create an instant bond between you and your guitar through meticulous design in bracing, voicing and overall construction. Every component—from our bi-level bridge to our solid bridge plates and neck blocks—is carefully considered to deliver the best response possible from solid-top construction. 
 
Artist Series guitars are responsive with impressive projection and balance that make them both rewarding and inspiring to play. 
 
With a huge selection of body shapes and wood configurations, Artist Series has a guitar for everyone. For a more focused, woody tone, choose a Mahogany top. For a broader, more open projection, choose Sitka. For a warm response to a lighter, melodic touch, choose Cedar. 

Our Approach to the Build

All of our solid tops are selected by our team and graded independently of our suppliers. If it isn’t worthy, it isn’t used. Our laminated backs and sides are uniquely constructed with Mahogany as our middle layer, and our inner and outer layers are always matched. 

Artist guitars strike the right balance between strength and vibration, crafting a voice to both inspire and give players “tools in the tone.” Alongside this approach to development lies our respect for sourcing, preparation and nurturing the wood we use to make our guitars. No matter how considered design may be, it can only be as good as the wood we use to realize them. 

Our all-solid wood tops, backs and sides, as well as the mahogany used for our necks, go through a curing process developed over years to create stability, strength and tonal benefits. Depending on the wood and its use, this process takes many months or even years for some of our models.

After months-long seasoning, we perform an extra drying stage in thermo-kilns to further enhance wood stability and improve resonance. We call this process ATR—Advanced Tonal Response. ATR™ is a form of torrefaction—oxygen controlled, vacuum curing at special temperatures to remove more moisture and volatiles such as saps and sugars from the wood.

This does two things:

  • ATR™ makes our wood more stable when exposed to adverse dry or humid climates. While we can’t stop the effects of dryness or moisture saturation that can damage guitars, ATR™ goes a long way in helping our guitars become more resilient. Guitars will move or change according to the environment they are in and are more likely to move within the first two years from their production. A guitar usually becomes drier as it ages; this is one of the reasons why players often like the sound of an older guitar. ATR™ advances the natural, post-build drying process so the wood behaves as if it were more mature, stable, and resonant from the first day it is used.

  • The effects of ATR™ are also audible in the instrument. The biggest difference is the clarity and separation between notes and the overall response of the guitar. As the top is drier, it’s also quicker, more resonant, more open, even louder. New guitars can sometimes take time to reach this state as the wood dries over the years. ATR accelerates this effect to deliver a more sophisticated and complex voicing from day one.

Our caring approach to development comes from one unwavering goal: To deliver the best guitars in the market at every price point—instruments of a truly remarkable value that offer an unparalleled player experience.

Thank you for choosing Alvarez.

Top WoodSolid African Mahogany

  • Back and Sides WoodAfrican Mahogany

  • Top ColorShadowburst/Gloss

  • Back & Sides ColorNatural/Semi Gloss

  • Headstock FaciaIndian Laurel

  • Bridge PinsPPS Synthetic Bone

  • ShapeOM

  • NeckAfrican Mahogany

  • Pick Up/EQLR Baggs StagePro Bronze

  • BracingFS6

  • BridgeBi-Level Indian Laurel

  • InlaysMOP & Arylic

  • FingerboardIndian Laurel

  • Nut and SaddleBone

  • TunerChrome Closed Gears

  • Bridge PinsPPS Synthetic Bone

  • StringsD'Addario XTAPB1267

  • Neck Meets Body14th

  • Number of Frets21

DIMENSIONS

  • Overall Length (mm)1015

  • Body Width (mm)390

  • Body Depth at Heel (mm)96

  • Body Depth at Base (mm)108

  • Scale (mm)630

  • Scale (inches)24 13/16

  • Nut Width (mm)44,45

  • Nut Width (inches)1 3/4

AMS-44 Audio Interface
CA$229.99
Zoom WSL-1 Windscreen for Lavalier Microphone
CA$6.99
Zoom CBG-11 Carrying Bag for The Zoom G11
CA$149.99
Zoom PCH-4N Protective Case For Zoom H4N Handy Recorder
CA$41.99
Lava ME Air
Sale Price:CA$629.00 Original Price:CA$699.00
sale